fostex FE206 in front horn (BD-Design)
I dont have a plot, but here is some rough measurement using test CD
warble tone and radioshack SPL meter. Meter located 11 feet from horn
I read these warble tone measurements differently, I think that the horn is not too rigid or has a throat that is too small and is therefore too strong sounding in the lower range. If you use a back chamber then try to open it at the back to reduce the lower output, if not then you could make the throat larger for a better tonal balance.
Adding little pieces of foam in the corners will always be a good idea...
Ciao,
Bert
Complete thread:
- fostex FE206 in front horn - GC, 2005-02-03, 19:37
- fostex FE206 in front horn - GC, 2005-02-03, 23:26
- fostex FE206 in front horn - GC, 2005-02-04, 05:01
- fostex FE206 in front horn - GC, 2005-02-04, 10:03
- fostex FE206 in front horn - GC, 2005-02-04, 15:50
- fostex FE206 in front horn - GC, 2005-02-04, 10:03
- fostex FE206 in front horn - GC, 2005-02-04, 05:01
- fostex FE206 in front horn - GC, 2005-02-03, 23:26