Orelo/Orelino with Horns (Orelo/Orelino)

by TonyB, Toronto, Canada, Thursday, March 06, 2014, 13:47 (3702 days ago) @ Bert

Lower height panels with three 15" drivers are a possibility.
I would start with horn vertical placement and see if I can
place the 15" drivers around them.

The plan was to have the tweeter at ear level, 600Hz horn above
it and the 200Hz horn on top. This would be the arrangement for
Onken bass reflex enclosure on the bottom. With a three driver panel
the 200Hz horn could at the bottom, the tweeter at ear level
and the 600Hz horn above it. However, the throat may get narrower
with a three driver panel and it may be difficult to fit the horns
into the panel throat.

The horns will be either Goto S-200 and S-600 or LeCleac'h
version of Iwata horns. LeCleac'h horns would be more difficult
to fit since these are wide (in horizontal plane) and have
large outside throat diameter when made from wood.

Will the panels work well even if the drivers are spaced farther
apart? All your panels had drivers located close together.