Avatar

Oris 200 and Behringer dcx2496 (Oris Horns)

by Bert @, Sunday, March 16, 2008, 16:58 (3564 days ago) @ dvu969

Hi Dinh,

Has anyone tried using the Behringer dcx2496 for low frequency filtering with Oris 200's? If so, would you mind sharing the optimal setting?

You can cross them as low as you want but normally not below 180Hz. It depends a bit on the used driver too as some have a higher Q and need some "correction". For example, if you would use the B200 from Visaton then you can even cross as low as 130Hz after removing the peak in the lower midrange.

Bert

--
BD-Design - Only the Best!


Complete thread:

 RSS Feed of thread