Mains phase technique... (BD-Design)

by GC, Wednesday, October 12, 2005, 09:06 (6777 days ago) @ GC

Hi Don,

It always worked for me...

Using the help of the mains detector Chris was talking about. I forgot to mention that besides disconnecting all equipment from the tested device the mains should not be connected to the mains ground. If it is then measuring does not help deciding which setting works best.

I will read the article again and see if the DC approach is giving me the same results.... The AC measurements are much more easy to do though and show differences clearly.

Ciao,

Bert

Tags:
0

locked

3912 views

Complete thread:

RSS Feed of thread

front horn phase reverse - GC, 2005-09-22, 03:03
- front horn phase reverse - GC, 2005-09-22, 10:41
  - front horn phase reverse - GC, 2005-09-23, 06:58
    - front horn phase reverse - GC, 2005-09-23, 09:53
      - front horn phase reverse - GC, 2005-09-25, 06:20
        front horn phase reverse - GC, 2005-09-25, 09:04
        
        front horn phase reverse - GC, 2005-09-25, 10:09
        front horn phase reverse - GC, 2005-09-25, 13:00
  - front horn phase reverse - GC, 2005-09-27, 09:18
    - front horn phase reverse - GC, 2005-09-28, 09:25
      - front horn phase reverse - GC, 2005-09-28, 10:22
        front horn phase reverse - GC, 2005-09-28, 22:20
        front horn phase reverse - GC, 2005-09-29, 07:58
        front horn phase reverse - GC, 2005-09-30, 09:55
        Mains phase technique... - GC, 2005-09-30, 10:11
        Mains phase technique... - GC, 2005-09-30, 10:52
        Mains phase technique... - GC, 2005-09-30, 13:07
        Mains phase technique... - GC, 2005-10-10, 19:08
        Mains phase technique... - GC, 2005-10-11, 20:55
        I had the same feeling... - GC, 2005-10-12, 00:27
        
        Mains phase technique... - GC, 2005-10-12, 04:00
        Mains phase technique... - GC, 2005-10-12, 09:06
        Mains phase technique... - GC, 2005-10-13, 00:58
        Mains phase technique... - GC, 2005-10-13, 07:40